Description

White LED Upgrade Kit for your GM Window Switches. Replace your factory LED color to white. The drivers door switch or master switch requires 5 LEDs, we send 5 extra LEDs. The remaining 3 doors require 1 LED each and you will receive 7 extra LEDs. These will be enough to convert all 4 door switches with extra to spare. If you have installed any of our LEDs from our other kits you should be able to solder these also. Our DIY LED Kit includes the following : Double the quantity of LEDs needed to change all 4 doors. Step-by-Step Instructions with pictures. Tech support if you need help. We are not selling the window switch. We are selling an LED kit to upgrade YOUR switches. Please note: These are small SMD LEDs, they are much smaller than the LED cubes in our other kits. A small tip is required to solder them in place. The LEDs have a small notch in 1 corner of the LED. Note the position of the OEM LED on the circuit board and solder these LEDs in the same position. Our other White LEDs will match colors as they are from the same manufacturer. Once you have the door switches apart you will notice how easy the original LEDs are to replace. The LEDs will dim up and down just like the stock LEDs in your switches. Upgrade once and never replace again, these will last as long as your vehicle. Our eBay store: https://www.ebay.com/str/gmgaugerepair GM Gauge Repair - Onalaska Wisconsin - Since 2010 36,000+ GM instrument panels rebuilt with our lifetime warranty.